According to the market survey for many years, combined with the national conditions and user needs, the company has successfully developed the full-automatic water softener series of fluorex and Artur resistance based on the introduction of foreign advanced full-automatic controller. The automatic water softener mainly consists of three parts: centralized control system, ion exchange system and regeneration system. Among them, the control system and main operation accessories are all original parts of fleck and autotrot controller manufacturers in the United States. Ion exchange tank and regenerative salt storage tank are made of high-quality stainless steel (glass fiber reinforced plastic) and non-toxic engineering plastics by the company's professional manufacturers and supporting factories.

The product is divided into two types in control mode. That is, time control - timing type, flow control - metering type. The operation mode adopts single tank, double tank, multi tank and other combined forms, with full automatic control operation.

Market Research; market investment; market survey

Three parts

Navar; control system; operating system

Time control; duration control

Flow control

Unspeakable love

Scope of application

It can be widely used in the supply water softening of boiler, exchanger, condenser, air conditioning direct fired machine and other systems. It can also be used in the domestic water treatment of hotels, restaurants, office buildings, apartments and other industries such as food, beverage, brewing, laundry, printing and dyeing, chemical industry, medicine and other industries.

Product features

● high efficiency and low consumption: automatic operation, continuous operation, fast operation of equipment, high utilization rate, economic and reasonable water production. Jet device is adopted for regeneration, no salt pump is needed, and relevant investment cost is saved. Timing and metering program control, accurate water and salt consumption, no one for error, reduce operating costs. 10w-40w power consumption can meet the maximum power supply and operation of the machine;

● time and labor saving: easy installation, simple operation (program setting), automatic control. When installing, just connect the water in and out. After putting into operation, there is no need to assign special personnel for operation;

● reduce the occupied space: the top integrated valve structure, centralized operation pipeline, equipment in place, just leave the space occupied by the tank body;

● convenient adjustment and maintenance free: after installation and commissioning, the operation cycle and time can be adjusted automatically according to the needs, and the operation can be automatic or manual. The controller is made of brass and special organic materials. It is firm and airtight, safe and reliable, and the system is maintenance free.

Technical parameters and use requirements

● water inlet pressure: 0.2-0.6mpa;

● working water temperature: 2-50 ℃;

● power supply: 220V / 50Hz; power < 40W;

● hardness of raw water: ≤ 10mmol / L;

● hardness of outlet water: in accordance with gb1756-1996;

● resin model: 001 × 7;

● regenerant: industrial salt;

● if the water inlet pressure is lower than 0.2MPa, pipeline pump shall be installed;

● when the hardness of raw water is higher than 8mmol / L, the model shall be increased or secondary softening shall be adopted;

● installation foundation level, with trench;

● flush the pipe before use to avoid resin pollution. Add salt regularly during use. The solid salt is always higher than the liquid level to ensure salt water saturation.

　List of SSF and SSFT series water softeners (flow type) (freighter Series)

Table of main specifications, technical parameters and installation dimensions: (Artur Series)

Raw water hardness ≤ 1.5mmol/l, outlet water hardness ≤ 0.15mmol/l, raw water pressure: 0.15-0.35mpa

Operation cycle: 24 hours (including regeneration time) voltage: 220 V power consumption: 3-25 w