Summary
The main function of sfqct series carbon dioxide remover is to remove carbon dioxide from water so as to reduce the corrosion of water equipment. After removing carbon dioxide, the load of anion exchange column is effectively reduced, so as to improve the system economy and water quality. When the content of CO2 in the influent is more than 50mg / L, it is more economical and reasonable to install a CO2 remover in the system. The residual CO2 in the treated water is less than or equal to 5-10mg / L. The equipment is filled with multiple hollow balls. The main materials of the equipment are steel lined rubber and stainless steel.
Table of main specifications, technical parameters and installation dimensions:
Fan modelFan model motor model and power
project | Specifications | ||||||||||||||||
Φ600 | Φ650 | Φ750 | Φ800 | Φ1000 | Φ1100 | Φ1200 | Φ1250 | Φ1400 | Φ1500 | Φ1600 | Φ1800 | Φ2000 | Φ2200 | Φ2500 | Φ2800 | Φ3200 | |
outputt/h | 17 | 20 | 26.5 | 30 | 47 | 57 | 68 | 73.2 | 91.8 | 106 | 120 | 152 | 187 | 228 | 294 | 369 | 482 |
4-72-11 NO2.8A右0° | 4-72-11 NO3.6A右0° | 4-72-11 NO4.0A右0° | 4-72-11 NO4.5A右0° | 4-72-11 NO5.0A右0° | |||||||||||||
JO2-21-2 1.5kw | JO2-31-2 3.0kw | JO2-41-2 5.5kw | JO2-42-2 7.5kw | JO2-52-2 13kw | |||||||||||||
h(mm) | 1600 | 2000 | 2500 | 3200 | 4000 | ||||||||||||
H-h(mm) | 1550 | 1560 | 1570 | 1580 | 1697 | 1713 | 1721 | 1729 | 1854 | 1866 | 1878 | 1894 | 1926 | 2043 | 2019 | 2376 | 2441 |
h1 (mm) | 550 | 550 | 550 | 550 | 600 | 600 | 600 | 600 | 600 | 600 | 600 | 600 | 600 | 650 | 650 | 700 | 700 |
h2( mm) | 656 | 656 | 656 | 656 | 706 | 706 | 706 | 706 | 706 | 706 | 706 | 706 | 706 | 806 | 806 | 806 | 806 |
Φ1 (mm) | 680 | 730 | 830 | 880 | 1090 | 1190 | 1290 | 1340 | 1490 | 1590 | 1690 | 1890 | 2090 | 2315 | 2615 | 2915 | 3315 |
Φ2 (mm) | 715 | 765 | 865 | 915 | 1130 | 1230 | 1330 | 1380 | 1530 | 1630 | 1730 | 1930 | 2130 | 2360 | 2660 | 2690 | 3360 |
Bolt specification | M16 | M20 | M24 | ||||||||||||||
24 | 28 | 32 | 32 | 32 | 32 | 36 | 36 | 40 | 44 | 48 | 52 | 60 | 64 | 72 | 80 | 92 | |
L1(mm) | 227 | 341 | 374 | 414 | 454 | ||||||||||||
L2(mm) | 224 | 288 | 320 | 360 | 400 | ||||||||||||
L3(mm) | 256 | 320 | 355 | 395 | 435 | ||||||||||||
L4(mm) | 64 | 80 | 71 | 79 | 87 | ||||||||||||
B1(mm) | 250 | 306 | 336 | 371 | 406 | ||||||||||||
B2(mm) | 196 | 252 | 280 | 315 | 350 | ||||||||||||
B3(mm) | 228 | 284 | 315 | 350 | 385 | ||||||||||||
B4(mm) | 76 | 71 | 63 | 70 | 77 | ||||||||||||
Inlet diameter | 80 | 80 | 100 | 100 | 100 | 125 | 125 | 125 | 150 | 150 | 150 | 200 | 200 | 250 | 250 | 300 | 300 |
100 | 100 | 125 | 12v5 | 150 | 150 | 200 | 200 | 200 | 200 | 200 | 250 | 300 | 300 | 350 | 350 | 400 |